Status Of The Car Cradle Led; Troubleshooting - Tronic TKHQ 10 A1 Instrucciones De Uso

Status of the car cradle LED

The LED 3 lights up as follows depending on the operating status:
LED
White LED lights up for 3 seconds
White LED lights up permanently
White LED off
White LED flashes

Troubleshooting

A connected device is not charging (the white operating LED 8
on the car/USB adapter 0 does not light up)
No connection to the cigarette lighter. Check the connection.
♦
Depending on the vehicle type, it is possible that the ignition has to be
♦
switched on first.
The white operating LED 8 goes out after a device has been
connected
The car/USB adapter 0 is overloaded and will no longer charge con-
♦
nected devices. The internal overcurrent protection has been triggered.
Disconnect all connected devices from the car/USB adapter 0.
The white operating LED 8 lights up immediately and the car/USB
adapter 0 is ready for use again.
│ GB │ IE
■ 16
Operating status
Car cradle is being supplied with
power and is ready for use
Mobile phone is being charged
Stand-by
Mobile phone is not compatible
Error message
TKHQ 10 A1