De Dietrich DKC7340BB Manual De Usuario página 108

CHOICE OF LOCATION AND BUILDING IN
A
550
C
This appliance must be installed more
than 850 mm up off the ground. This
appliance may be installed in a cabinet
column, as indicated on the installation
diagram (fig. A).
Caution: if the back of the cabinet is
open, the space between the wall and
the surface on which the oven rests
must be no more than 70 mm* (fig. B).
Do not use your appliance immediately
(wait approximately 1 to 2 hours) after
550
450
447
547
moving it from a cold location to a hot location,
as the condensation may cause a malfunction.
Centre the oven in the unit so as to ensure
a minimum distance of 10 mm between the
appliance and the surrounding unit. The
material of the unit supporting the appliance
must be heat-resistant (or covered with a
heat-resistant material).
Drill a 2 mm diameter hole in the cabinet panel
to avoid splitting the wood.
For greater stability, attach the oven to the unit
with 2 screws through the holes provided on
the side panels (fig. C).
B
7