Hydraulic Circuit Diagram - Lukas e100 Manual De Instrucciones

4.2.4 Door opening tips (snap-on tips)
Please note!
Use caution installing
or removing tips. Wear
protective gloves to avoid
injury.
3-Finger door opening tip
CAUTION!
Use combination and door
opening tips only in pairs.
Never combine a single
combination tip with a single
door opening tip.
4.2.5 Rotatable handle
The handle can be rotated about 360 degrees with four set points every 90 degrees. This
allows for easy change of position of the tool for the best angle attack. To do this, pull the
locking pin upwards while turning the handle to the desired position. Let go of the locking pin
and it will automatically engage the next locking position, thus securing the handle again.

4.3 Hydraulic circuit diagram

Below a simplified hydraulic cylinder representing the tool is depicted.
A = tool B = star grip valve
B
A
Push button to release
and automatically lock
the tool tip
cutting / gripping / closing
or extending the piston
spreading / opening
or retracting the piston
55
2-Finger door
opening tip