Repairs; General Information - Lukas e100 Manual De Instrucciones

10.1 General information

Service work may only be performed by the device manufacturer or by personnel trained by
the device manufacturer and authorized LUKAS dealers.
Only LUKAS spare parts may be used to replace all components (see spare parts list), as
special tools and compliance with, assembly instructions, safety aspects and inspections are
required (see also chapter "Maintenance and Servicing").
During assembly, ensure that all components are particularly clean, as dirt can
damage the equipment!
WARNING / CAUTION / PLEASE NOTE!
To avoid injuries, take out the battery each time before you do any repairs.
This avoids an unwanted start up or movement in the cutting and spreading
area of the device.
As the devices may also be pressurized when not in operation, protective
clothes must be worn when repairs are being carried out.
NOTE:
Always register your tool on the LUKAS internet site. This is the only way to
guarantee extended warranty cover.
ATTENTION!
Because LUKAS devices are designed for highest performance, only components
specified in the spare parts list for the appropriate equipment may be replaced.
Other components in the device may only be replaced if:
- You have participated in an appropriate LUKAS service training course.
- You have been explicitly granted permission by LUKAS Customer Service
(valid LUKAS certificate required!)
ATTENTION!
When cleaning units and equipment, note that no cleaning agent may be used
that has a pH value outside the range 5 - 8!

10. Repairs

70