Configure The System - CARLO GAVAZZI WM50 Manual De Instrucciones

Configure the system

Configure the system
Configure WM50
Configuration mode
The configuration modes for each component are provided below:
Component
Main unit
Accessory modules
TCD12
Configuration requirements via UCS
To configure the system with UCS:
Acquire a PC or smartphone with one of the following applications installed:
l
Application
UCS Mobile
UCS Desktop
Equip WM50 with one of the following communication interfaces:
l
Application
MCETH
MC485232
OptoProg
Configuring WM50 via touch keypad
1. Open the settings menu.
2. Set parameters and save.
To learn how to interact with WM50 , see "Interface" on page 8.
To learn more about settings pages, see "Settings from WM50" on page 31.
Configuring WM50 via PC or smartphone
Note: communication parameters may need to be set via touch keypad to communicate with WM50.
28 WM50 - Instruction manual | 26/04/2022 | CARLO GAVAZZI Controls SpA
WM50 keypad
x (excluding daylight savings time, tariff calendar
and database)
x
-
Compatibility
Smartphone Android
PC Windows 7 or later
Compatibility
UCS desktop
UCS Mobile
UCS desktop
UCS desktop
UCS Mobile
UCS desktop
x
x
x
Where to find it
Google Play Store
www.productselection.net/Download/UK/ucs.zip
MC 485232
RS485
or
MC ETH ( > rev. *3*)
or
Optoprog
UCS Mobile
x (excluding tariff
calendar and database)
x
x
Description
Modbus TCP/IP communication module
Modbus RTU communication module
Optical interface for Bluetooth or USB
communications
UCS Desktop
UCS Mobile