Freezer Drawers - Signature SKSFD4826P Manual Del Propietário

en-us_main.book.book Page 19 Tuesday, January 10, 2023 2:32 PM
7
To assemble, extend the rails for the drawer
frame until they stop.
8
Align the edges under the drawer base with
the grooves on each rail, then lower the
drawer base until it clicks into place.
9
With the front slightly tilted up, insert the
crisper drawer and cover into the frame and
push them back into place.
CAUTION
• Make sure that the crisper is level from one side
to the other. Failure to do so may result in the
crisper falling or spilled food.
• Do not clean the crisper glass with warm water
while it is cold. The crisper may break if exposed
to sudden temperature changes or impact.
• The crisper is heavy. Use special care when
removing it.

Freezer Drawers

Removing/Assembling the Freezer
Drawers and Convertible Drawer
WARNING
• Use two or more people to remove and install
the drawer.
• Be careful of sharp hinges on both sides of the
drawer.
• When you lay the drawer down, be careful not to
damage the floor.
• Do not sit or stand on the drawer.
• To prevent accidents, keep children and pets
away from the drawer. Do not leave the drawer
open.
1
Side View
2
3
4
To remove, pull a drawer open to full
extension.
Push the button to disengage the stopper on
either side.
Lift the front of the basket up, then pull it
straight out.
Remove the screws from the rails at the front.
OPERATION 19