Troubleshooting; Parameters - KNOVA KN GENI-23 Manual Del Usuario

TROUBLESHOOTING

Engine can't start
Max
oil level
Min
oil level

PARAMETERS

Generator
Noise level dB / LpA / LwA / K 4m (1/4 load)
Engine
Generator set
V Only 230V 50Hz with data meter product is GS certificated.
1. Fuel systems
• No gasoline in the fire
chamber.
• No fuel in the fuel
tank...add fuel.
• Fuel in tank.
• Clogged fuel filter ....
Clean fuel filter.
• Clogged carburetor....
Clean carburetor.
2. Engine oil system
• Oil level is low.... Add
engine oil.
Model No.
Type
Rated frequency / Hz
Rated voltage / V
Starting watts / kW
Rated output power / kW
Power factor
AC output quality
THD / %
DC output / V-A
USB output / V-A
Overload
protect
Engine
Engine type
Displacement / cc
Fuel type
Fuel tank capacity / L
Continue running time (1/4 load) / h
Engine oil capacity / L
Spark model No.
Starting mode
Length x width x height / mm
Net weight / kg
Generator won't produce power
• Safety device (DC protector) to "OFF".... Press the DC
protector to "ON".
• The AC pilot light (Green) go off.... Stop the engine,
and then restart.
V
V
DC
Control by inverter overload protect program
AC
Single cylinder, 4-Stroke, forced air cooling, OHV
12
3. Electrical systems
• Put the 1 in 3 switch to
"CHOKE" and pull the
recoil starter...Poor
spark.
• Spark plug dirty with
carbon or wet....
Remove carbon or wipe
spark plug dry.
• Faulty ignition
system.... Consult
a franchised dealer.
KN GENI-23
Inverter
50 / 60 / 50
110 / 120 / 230
2.3
1.8
1.0
ISO8528 G2
≤5
65
12 - 8.3
5 - 3
Non-fuse protector
148F
79
Unleaded Gasoline
4.0
8
0.35
A5RTC
Recoil start
499 x 285 x 455
21