Preparations For Operation; Operating The Appliance - Gymrex GR-MG73 Manual De Instrucciones

Idiomas disponibles

13. P – speed program selector (1 to 6)

14. Increase the value

15. Reduce the value

16. S – slow stop

17. M – cycles between these settings:

• Time [8] – time setting (minutes : seconds)

• Speed [9] – speed setting (kmh)

• Distance [10] – distance setting (km)

• Calories [11] – calorie to burn setting

3.2. Preparations for operation

POSITIONING THE APPLIANCE

The maximum ambient temperature and relative humidity limits not to be exceeded

are +40°C and 85% RH, respectively. Position the appliance where good air

circulation is ensured. Keep the appliance away from any hot surfaces. Always

operate the appliance on a level, firm, clean, fireproof, and dry surface and out of

the reach of children and individuals with reduced mental, sensory and intellectual

capacities. Position the appliance where the mains plug can be reached at any time.

Make sure that the mains power ratings match the data on the rating plate!

Keep at least 0.6 m of clearance over and around the appliance, except for the

appliance rear plane which requires 2 m of clearance during operation.

1. Lift the handrail [2] up to deploy the appliance.

Tabla de Contenido