koban KPHD-NFC-ASTRO3 Manual De Instrucciones página 24

Operations
Press MENU.
Use the +/– buttons to select the «loc» date
setting mode.
Confirm with OK.
To configure localization using the country and
city code table (Table 1).
Use the +/- buttons to select country.
Confirm with OK.
Use the +/- buttons to select a city.
Press OK to confirm the entered area code.
Confirm OK.
Use the +/– buttons to set the value degrees.
Confirm OK.
Use the +/– buttons to set the minutes value.
Confirm OK.
Use the +/– buttons to set the value degrees.
Confirm OK.
Use the +/– buttons to set the minutes value.
Use the OK button to confirm the entered
coordinates.
Result provides buttons
3. LOCALIZATION (LOCATION) - Loc
The time relay will switch over to the
programming menu.
The time relay will sitch over the position
setting menu (CodE - n-E).
n-E - manual setting of the consumer's
geographic position.
CodE - select a location from the coordinate
code table.
3.1. Coordinate codes - CodE
The relay will switch to selecting the country
code.
The time relay will go to the area code
selection menu.
The time relay switches to the programming
menu.
3.2. Geographical location - n-E
The time relay will switch to setting the
degrees of north latitude.
The time relay will switch to setting the
minutes of north latitude.
The time relay will switch to setting the
degrees of east longitude
The time relay will switch to setting minutes
of east longitude
The time relay switches to the programming
menu.
4
Display indication
/