koban KPHD-NFC-ASTRO3 Manual De Instrucciones página 27

Operations
Confirm with OK.
Use the +/– buttons to set the desired value.
Confirm with OK.
Use the +/– buttons to set the desired value.
Confirm with OK.
Use the +/– buttons to set the desired value.
Press OK and select the relay state for this
period.
Confirm with OK.
To exit to the menu for setting the annual
program, press MENU, to exit to the main
mode, press MENU again.
Editing the annual program
Press MENU.
Use the +/– buttons to select the «ProG»
annual program setting mode.
Confirm with OK.
Confirm with OK.
Confirm with OK.
Further, similar to the paragraph «Adding an
annual program».
Result provides buttons
The time relay will switch to date selection:
first month, then day.
The time relay will move to setting the start
time of the program: first hours, then
minutes.
The time relay will move to setting the start
time of the program: first hours, then
minutes.
ON - enabled
OFF - disabled
The program will be created, the product will
offer to create the next program.
The time relay will go to the programming
menu.
The indicator will display the Edit mode for
programs.
The time relay will offer to select a cell from
the programmed ones for editing the
program.
7
Display indication