Publicidad
Idiomas disponibles
Idiomas disponibles
17 Machine configuration menu
In this menu, it is possible to recall soft-
i
ware versions (revision) and make set-
tings to the machine configuration.
 Call up the secondary parameters by pressing
button 19 for 2 sec.
 Call up the machine configuration menu by
pressing button 19 for 2 sec.
‰ You are now in the Machine configuration
menu. The parameter code and the parameter
value are alternatingly shown.
 Set the desired menu point by rotating the con-
trol knob 14.
Code
rEL
Master version number
rEP
Process version number
SoI
rEd
Display version number
rEI
Primary version number
IGO
StP
Start peak
Sbt
Auto standby time
This function warns of overloading of the main fuse with rapid flashing
of the STANDBY LED in button 28 and, if desired, dynamically reduces the
welding current to prevent the main fuse from tripping.
Fuse option (230V)
FuO
Fuse option (115V)
This parameter sets the mains power fuse used.
The max. selectable current is also limited at this point.
FuS
See "Fuse options" on Page 35
Various settings are available depending on the mains connection.
Fur
Fuse power reduction
When the "Fuse power reduction (Fur)" function is activated, the welding
current will be dynamically reduced as required according to the pre-set
fuse option (FuO) to prevent the main fuse from tripping. This is indicated by
the On/Off button 20 flashing at a higher rate.
Tab. 2:
Machine configuration menu
- 34 -
Parameter
909.4119.9-02
Machine configuration menu
 Confirm the menu item by pressing operating
button 14.
9 The parameter value flashes when the param-
eter is settable.
 Change the value of a parameter by turning
control knob 14.
 Store the change by pressing control knob 14.
‰ A description of the menu structure is provided
in the following table.
 Press button 19 to terminate a change without
storing or to exit a menu level.
Standard
Setting range
value
100 %
OFF
OFF, 5...30 min
16A
10, 10F, 13, 13F,16, 16F
25A
20, 20F, 25, 25F
OFF
Mode
x
x
x
x
x
1 - 200 %
x
x
x
OFF - On
x
x
x
x
x
x
x
x
x
07.19
Publicidad
