Installing Your Microlens; Webcam Blocker; Stylus Pen Battery Replacement; Turn On/Off Your Device - jp.ik SLIDE S301 Manual Del Usuario

4.4 Installing your microlens

With a few steps, you can turn your system into a microscope.
1. Gently press the microlens over the rear-facing camera.
Make sure the bottom of the lens is fitted into the outer
rim of the camera.
2. Activate any camera app in your system.
3. Gently press the lens on the object or tissue you want
to observe.

4.5 Webcam blocker

4.6 Stylus pen battery replacement

1. Unscrew the end part of the stylus.
2. Replace the AAAA battery with the positive (+) end of
the battery pointing toward the writing tip.
3. Screw the end back on.
With the tablet facing you, slide the
blocker to the left/right position to
unblock/block the front facing camera.

5. TURN ON/OFF YOUR DEVICE

To turn on the device, press the power button
(normally 1 to 2 seconds) until you see the display
turn on. Connect the AC adapter and fully charge
the battery.
Press the power button (normally 1 to 2 seconds)
until you see the power indicator light up in blue.

5.1 Turn ON for the first time

The laptop will require you to do the initial setup, which includes:
• Activate your Windows 10;
• Sign in to or create your Microsoft account;
• Setup a wireless connection and more.
Please follow the instructions to complete the initial setup.

5.2 Turn OFF your device

Before turning off your device save all your data. To turn off your device, follow
the next steps:
• Click the Windows icon in the low-left corner of the Desktop.
Or, press on the Windows key in the keyboard;
3 click here
• In the start menu click on the Power icon and select Shut
Down from the power option menu as shown in the image.
2 click here
1 click here

5.3 Sleep mode

While away from your device it is recommended to put it into sleep mode. To
put your device to sleep mode follow the below:
• Close the display panel;
• Press the power button briefly one time;
• Open the Start menu and click on Power and then Sleep.
It is recommended that you put your computer to sleep before you move it.
Especially if your laptop comes with a traditional hard disk, instead of a
modern SSD. Moving your computer while the hard disk is spinning can
sometimes damage the hard disk, causing loss of data.
8