Control Elements And Connections; Using Of Device - Wiha 45222 Manual De Instrucciones

INSTRUCTION MANUAL

Control elements and connections

1 LED indicates high (dangerous)
voltage from 50 V up to 400 V
2 LED indicate measurement range
< 10 Ω
3 LED indicate low battery
4 Button for different ranges and
torch light
LED indicate measurement range
5
< 500 kΩ
6 LED "Rx" indicate continuity
7 Torch light

Using of device

Continuity tester can be turned on with short press on pushbutton 4 . The
•
continuity tester turns on automatically if continuity < 500 kΩ is detected
between probes. After turn on, continuity tester operates in < 500 kΩ operating
mode by default.
• Short press on pushbutton switches between operating modes:
< 500 kΩ or < 10 Ω. < 500 kΩ à < 10 Ω à < 500 kΩ
• Long press on pushbutton > 2 s turns on Torch light. Torch light turns off auto-
matically 30 s after activation, or by second Long press > 2 s on pushbutton.
18
Continuity tester
400 V AC, CAT II
1
2
<10Ω
3
<10Ω
<500kΩ
2 sec.
7
Rx
6
5
<500kΩ
4