Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction manual
•
Always use oven mittens to remove the baking racks from the oven.
Fat collecting/ baking tray
•
Always place the fat collecting/baking tray in the lower rails of the oven
to collect dripping fat, food residues or crumbs. It can also be used as
a baking tray by placing food on it. When used as a baking tray use
the middle rails for the best results.
DISPLAY PANEL
•
Power/Start-Stop Icon
Once the appliance is plugged in, the Power icon will light up. Selecting
the Power icon once will cause the full display panel to be illuminated.
Selecting the Power icon a second time will activate the cooking process
at the default temperature of 185°C and time of 15 mins. Selecting the
Power icon at any time during the cooking process will stop the operation.
[OFF] and the operating indicator will be shown in the display then the
display will be deactivated after 20 seconds.
•
Internal Light
Select the internal light icon to turn the internal light on or off. This will help
you check cooking progress while the appliance is in operation.
The internal light will illuminate when the oven door is opened. Opening
the door during the cooking process will pause the cooking process. The
operation will resume when the door is closed.
•
Rotation Icon
6
Select this icon when cooking with the rotating basket or spit fork. This
function can be used in combination with any of the cooking pre-set
programs.
•
Temperature Control Icons
These icons enable you to raise or lower cooking temperature by 5°C
intervals ranging from 80°C -200°C. The temperature range for the
Dehydration setting ranges from 30°C – 80°C.
•
Cooking Time Control Icons
These icons enable you to program the cooking time. The cooking time
can be programmed between 1-90 minutes in all modes except
Dehydration which is programmable in 30-minute intervals between 2 – 24
hours.
•
LED Digital Display
The Digital Numeric Display will switch between Temperature and Time
Remaining during the cooking process.
•
In Operation Icon
This icon will blink in sequence while cooking is in progress and continue
blinking up to 20 seconds once the appliance is shut down.
•
Cooking Pre-sets
Selecting any of the Pre-set program icons sets the Time and
Temperature to the pre-set's default value. The cooking process starts
automatically five seconds after the pre-set program has been selected or
by pressing the power icon. You can override these pre-set values with
Time and Temperature control icons.
Publicidad
