Bench Alignment - Blatchford BMK2 Knee Instrucciones De Uso

7 Bench Alignment

When aligning the prosthesis for use with the device, position of the load line is critical. The knee
should be aligned so that it is geometrically stable. With flexion fully accommodated, the load
line should pass through or up to 5 mm anterior of the knee center.
Trochanter
Build Line
Knee Pivot
Center
Users to be aware of
potential finger trap
hazard at all times.
Adjust heel
height to suit
the user's own
footwear
Load Line
Load line must be fall
between knee pivot center
and up to 5 mm anterior to
the knee pivot center.
For foot alignment, refer to fitting
instructions supplied with foot.
8
938268PK1/1-0422