Lindy 39375 Manual De Usuario página 6

User Manual
Important! Before starting the installation, please ensure that all devices are powered off.
1. Connect a DisplayPort source device to the Transmitter unit using a DisplayPort cable and USB Type
B cable.
2. Connect one end of the Cat.6/7 cable to the Cat.6 Out port on the Transmitter and the other end to the
Cat.6 In port of the Receiver. U/UTP or F/UTP solid core installation cables are recommended. For
cable lengths please see the Specifications of this manual.
3. Use another DisplayPort cable to connect a DP display to the DisplayPort output port on the Receiver
unit.
4. Connect a mouse and keyboard to the receivers USB Type A ports.
5. Plug the DC power supply into the Transmitter or Receiver and switch on.
6. Power on the source device and display to complete the installation.
In addition to the installation steps outlined above this DisplayPort extender can also provide the following
additional/optional functionality:
RS-232 Serial
The Transmitter and Receiver both feature a 3.5mm serial connection for the extension of control signals.
Infrared Control
The Transmitter and Receiver units both feature an IR In and Out port, with 1 pair of IR extension cables
provided. The extension cables allow an IR remote control to be used from the Transmitter to the Receiver
or vice versa.
IR Receiver
Troubleshooting
There is no display on the screen.
It has been found that there are significant differences in the cable lengths/types and even input ports
which can be used on different brands of display using DisplayPort resolutions. If problems are
experienced, please apply the following steps:
Try a different input port on the display.

Reduce the cable length on the Input and Output to 1m.

Try a different type of 1m DisplayPort Cable.

Check that the DC plug and jack used by the external power supply is firmly connected.

Check that the Cat.6/7 cable is plugged in correctly.

Power off all the devices, then power on in this order: first, the extender, then the display and finally

the source.
Reduce the length of Cat.6/7 or HDMI cable used or use a higher quality cable.

Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.
For the most up to date version of this manual, please refer to your local Lindy website, search for the
relevant part number and find the manual under Downloads.
IR Emitter
English