Common Specifications; Installation; General Installation; Installation Of Bw Series - Baxtran BW Serie Manual De Usuario

COMMON SPECIFICATIONS

Interface
Settling Time
Temperature of operation
Supply of current (external)
Calibration
Screen
Materials of manufacture
Size of the dish
General dimensions (width x bottom x high)
Applications
Functions
Other components and specifications

3. INSTALLATION

3.1 GENERAL INSTALLATION

The scales should be sited in a location that will not degrade the accuracy.
Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near vibrating machinery.
Avoid uns table power sources. Do not use near large users of electricity such as welding equipment or large motors.
Avoid high humidity that might cause condensation. Avoid direct contact with water.
Do not spray or immerse the scales in water.
Avoid air movement such as from fans or opening doors. Do not place near open windows.
Keep the scales clean.
Do not stack material on the scales when they are not in use.

3.2 INSTALLATION OF BW SERIES

The BW Series comes with a stainless steel platform packed separa tely. Place the platform in the locating holes on the top cover. Do
not press with excessive force as this could damage the load cell inside.
Level the scale by adjusting the four feet. The scale should be adjusted such that the bubble in the spirit level is in the centre of the level
and the scale is supported by all four feet, If the scale rocks readjust the feet.
Attach the mains cable to the connector on the bottom of the scale. The power switch is located on the base near the front of the scale.
!
Perform a weight calibration as instructed in chapters 10 (setup) and 11 (calibration)
Exit RS.232 optional
Usually 2 seconds
0 ºC until 40 ºC / 32 ºF until 104 ºF
115 / 230 V ac, 50/60 Hz, 10 watts
External automatic
Digital screen LCD of 6 digits
Plastic ABS, dish of stainless steel
225 x 300 mm
320 x 340 x 125 mm
Scales for general ends
Weight, counting, percent weighing, check weighing
Internal battery rechargeable (70 h. Of length approx.)
USER'S MANUAL BW EN EN
5