Publicidad
8a
8b
6
EN
Check the delivery for completeness and absence of damage, the presence of a mark on the
date of sale and the stamp of the trade organization upon purchase.
- P lease read carefully the requirements of this manual.
- P rotect the item from shocks and mechanical damage.
- To avoid injury, ensure the correct and secure assembly in accordance with the requirements
of this manual before the first use of the
- T
he
product
+40°C and relative humidity of 45% to 70%.
- Do not use abrasive or aggressive cleaning materials when cleaning the product. It is
recommended that you wipe the metal parts of the product with a damp cloth and then dry
with a soft, clean cloth. Care for the textile parts of the product in accordance with the symbols
indicated on the label.
- Check all components for damage or loss before assembling the product.
- Assembling and installation of the product must be done by adults.
- Remove packaging material before using the product to avoid the risk of suffocation.
- Check that all components are properly secured before using the product.
- The presence of adults and their control are required when the child is in the highchair.
- For safe use, check that the belt is fastened correctly and adjust its length when the child is in
the highchair.
- The highchair is designed only for one child.
- It is forbidden to use a highchair until the child learns to sit directly on his own.
- Do not leave your child unattended.
- The installation of the product is permitted only on a flat, stable surface. Never place it near a
staircase or steps.
- Do not install the product in front of walls, window openings, near curtains, or near doors and
electrical wires, as a child may use these objects to climb up, or they may cause strangulation.
- Make sure that the surface of the cover has cooled down before next use if you leave the
highchair under the action of sunlight for a long time.
- The highchair cover may fade with prolonged action of sunlight.
- Never let children play close to the highchair or climb on it.
- Do not hang bags or other heavy objects on the highchair. This can lead to imbalance of the
CLICK!
CLICK!
product.
- It is forbidden to move the highchair when the child is in it.
WARNING: Do not place the product near open flame and other sources of intense heat such as
electric radiators, gas, etc.
- Do not place your child in the seat with his feet, do not leave unattended.
- Do not use the product if some parts are missing or broken.
- Do not use non-original spare parts. Contact manufacturer or reseller for spare parts.
Warranty from the manufacturer
The product meets the requirements of CU TR 025/2012 "On the safety of furniture".
The baby bouncer seat is made in accordance with GOST 19917 and have the Certificate of
conformity № ЕАЭС RU C-RU.АД71.В.00660/19.
1. he manufacturer guarantees the conformity of product to the requirements of normative
T
documents under condition of the observance of rules of storage, transportation, operation and
assembly.
2 The lifetime is 2,5
.
3. The warranty period is 24 months.
4. If the operating manual does not contain the sale date, confirmed by the seal of the trade
organization, the warranty period starts from the date of manufacture of the product.
5 D
. uring the warranty period any defects are eliminated free of charge. If a defect is found, you
should immediately inform the manufacturer. The decision to repair or supply a spare part is at
the discretion of the manufacturer.
6 T . his product is not suitable for commercial or industrial use. Violation of terms of use results
in the reduction of the warranty period.
7 T . he warranty covers only materials or manufacturing defects. Spare parts' deterioration or
damage which may occur as a result of incorrect exploitation, use of force or intervention
which took place without prior consultation with our service Department, are not covered by
warranty.
8 P . lease keep the original packaging during the warranty period to ensure safe transportation
of the product in case of return. Do not send the item to our service department without
packaging!
Acceptance certificate
The product # ______________ is made and accepted in accordance with obligatory requirements
of standards, current technical documentation and is acknowledged to fit for service.
The technical control representative _____________________________
Manufacture date ___________________
Packer ______________________________
Repair, replacement of parts and components of the goods during the warranty period
are made at the following address:
Polini GmbH
Dieselstraße 2, 40721 Hilden, Deutschland
tel.: +49 800 7245184, e-mail: info@polinigroup.de
Sale date ___________________
Stamp of the selling company _______________________________
The manufacturer reserves the right to make minor technical changes not reflected
in this guide.
Requirements for security,
storage and use
product
.
should be stored indoors at a temperature not less than +2°C and not above
years
.
Publicidad
