Instruction manual
•
Choose for either manual input of the time and temperature for Air
Frying, Steaming or for both using the COMBO feature or choose one
of the 9 pre-set programs.
AIR FRYING
•
Press the Air Fry icon.
•
Use the Time Up and Down and the Temperature Up and Down icons
to set the desired time and temperature.
•
Press the Power button to start the operation. The '' in operation'' will
run in the display and the operation will start.
Note: For best results, some ingredients require shaking halfway through
the preparation time. To shake the ingredients -
•
Halfway through the operation, pull the basket out of the Aerofryer by
the handle, the operation will stop.
•
Shake the ingredients as needed.
•
Slide the basket back into the Aerofryer. The operation will
automatically resume.
•
Do not touch the inside the basket during and sometime after use as it
gets very hot. Only hold the basket by the handle.
•
When the operation is complete the appliance will beep 5 times then
shut down after 20 seconds.
•
Carefully remove the ingredients from the basket.
•
Unplug the appliance and allow it to cool down completely before
cleaning.
STEAM
8
•
Remove the water tank from the appliance and turn the stopper to
open it.
•
Fill the water tank with water. Always fill with pure water as this helps
to delay a limescale build-up. Make sure to properly secure the
stopper. Place the water tank back onto the device.
•
Press the STEAM icon. The icon will flash and the temperature will be
set automatically to 100°C.
•
When the appliance is in steam mode, you cannot adjust the
temperature.
•
Set the steaming time by using the Time UP and Down icons.
•
Press the Power icon to start the operation. The '' in operation'' will run
in the display and the operation will start.
•
When the operation is complete the appliance will beep 5 times then
shut down after 20 seconds.
•
Carefully remove the ingredients from the basket.
•
Unplug the appliance and allow it to cool down completely before
cleaning.