Publicidad
Safety instructions regarding maintenance
WARNING
6
•
Switch off and unplug the appliance before service and when replacing parts.
•
Let the appliance cool down before cleaning.
•
Never immerse the appliance in water or place it in a dishwasher.
•
Do not use abrasive chemical cleaning agents such as ammonia, acid or
acetone when cleaning the appliance. This can damage the appliance.
•
Risk of cable breakage! Do not wind the cable tightly around the appliance.
•
Risk of electric shock! Switch off and unplug the appliance before cleaning
the appliance.
•
Do not use any other materials or methods than described in the manual to
clean the appliance.
•
Risk of electric shock! Never replace the hair filter when it is wet. Drops of
water could be aspirated by the fan and could reach the heating element
causing short circuit
•
Never use the appliance without the hair filter attached.
•
Repairs to this appliance/including mains cable replacement may only be
carried out by authorised service agents. Improper repair work can be a
source of danger to appliance users.
CO N T E N T S
V
Please check the contents of the package:
1x
SWISS PERFECTION 360° ionicPRO
1x
Hair-styling nozzle
A P P L I A N C E D E S C R I P T I O N ( S E E I M AG E B )
V
Hair-styling nozzle
1
Power cable
2
Detangler
3
CO N T R O L S W I TC H E S ( S E E I M AG E C )
V
Cold shot button
7
Heating level switch
8
ON/OFF and motor speed switch
9
B E F O R E F I R S T U S E
V
1.
Remove all packaging, stickers and labels.
20
Hair filter
4
Control switches
5
Hanging eyelet
6
I N S TA L L AT I O N
V
We recommend the installation of a residual current circuit-breaker to provide additional protection
4
when using electrical appliances. It is advisable to use a circuit-breaker with a nominal fault current of
maximum 30 mA. Your local electrician can advise you.
1.
Plug the power cable
into a power outlet.
2
U S I N G T H E H A I R D RYE R
V
1.
Set the ON/OFF and motor speed switch
2.
Set the heating level switch
to the desired level. The appliance produces a cold or hot air flow.
8
ON/OFF and motor speed switch Heating level switch
Appliance is switched off
0
Appliance is switched off
0
Appliance is switched off
0
Cold, motor runs slowly
I
Warm, motor runs slowly
I
Hot, motor runs slowly
I
Cold, motor runs fast
II
Warm, motor runs fast
II
Hot, motor runs fast
II
The appliance is equipped with a safety thermostat. The heating element automatically switches off
4
when the appliance overheats. The motor keeps running to cool down the heating element. After
a short break, the heating element switches back on automatically. Ensure that the air inlets and
outlets are completely free from dust, dirt or lint. If necessary, clean the appliance with a soft, dry
cloth.
The detangler prevents the power cord from twisting and tangling up while the hairdryer is in use.
4
U S I N G T H E CO L D S H OT B U T TO N
V
Use the cold shot button after drying and/or brushing your hair. To use the cold shot button:
1.
Press the cold shot button
to produce a cold air flow.
7
U S I N G T H E H A I R - S T YL I N G N O Z Z L E
V
1.
Switch off the appliance.
2.
Let the appliance cool down.
Put the hair-styling nozzle
3.
onto the front of the appliance to attach the nozzle.
1
4.
Use the appliance (see chapter Using the hair dryer).
5.
Let the appliance cool down.
Remove the hair-styling nozzle
6.
from the appliance.
1
to the desired level. The appliance switches on.
9
0
I
II
0
I
II
0
I
II
21
Publicidad
