Descargar Imprimir esta página

COMAC cm mini orbital Manual De Uso Y Mantenimiento página 14

Ocultar thumbs Ver también para cm mini orbital:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
The machine must be kept only in enclosed areas.
Always use the machine in compliance with its intended use, taking into consideration local
conditions and looking out for the presence of others when working, especially children.
Never leave the appliance unattended until it has been switched off and the plug has been taken
out of the mains socket.
To prevent unauthorised use of the machine, the power supply should be cut off, switch off the
machine and pull out the power cable from the socket.
If the machine is left unattended, it must be protected from any accidental movements.
WARNING:
Before transporting, block the control handlebars so they cannot move.
Do not tip over the machine if there is liquid in the detergent solution tank.
When transporting the machine, the engine should be switched off, and also make sure that the
machine is in a stable and secure position.
DANGER:
Before cleaning and carrying out maintenance on the machine and before replacing any
components, switch off the machine and pull out the power plug from the mains socket.
Repairs should only be carried out by authorised service centres or by personnel who are
experts in this field and who are familiar with all the current safety norms.
Observe the safety check as per local provisions for commercial appliances.
Always wear suitable protective gloves when working with the machine.
CAUTION:
If the machine does not work properly, check this is not caused by failure to carry out routine
maintenance. Otherwise, ask for intervention of the authorised technical assistance centre.
If you need to replace any components, request the ORIGINAL spare parts from an Authorised
Retailer or dealer.
Restore all electrical connections after any maintenance interventions.
Have the machine checked by an authorised technical assistance centre every year.
When disposing of consumable materials, observe the laws and regulations in force. When
your machine has reached the end of its long working life, dispose of the materials it contains in
an appropriate manner, and bearing in mind that the machine itself was constructed using fully
recyclable materials.
If the power supply cable gets damaged, the machine must be stopped if it is operating.
Disconnect the plug from the power supply, and have the cable replaced immediately by an
authorised service centre.
Only use the discs supplied with the machine, or those specified in the Instruction Manual. The
use of other discs could compromise safety levels.
TRANSPORT
MAINTENANCE
14

Publicidad

loading