Cleaning And Maintenance; Warning Signals - cecotec POWER MATIC-CCINO 7000 Serie Manual De Instrucciones

ENGLISH
Use the arrow buttons to select the temperature.
Fig. 16
Setting auto shut-off
Once the coffee temperature has been set:
Press the MENU button.
Use the arrow buttons to set the automatic shut-off time (from 1 to 24 hrs).
Fig. 17
Resetting parameters
Once the automatic shut-off time has been set:
Press the MENU button.
Press ICON 1 (double) to reset factory settings.
Fig. 18

4. WARNING SIGNALS

1. Fill the water tank.
Fig. 19
2. Add coffee beans to the tank.
Fig. 20
3. The drip tray cannot be detected. Install it correctly.
Fig. 21
4. The coffee residues tank cannot be detected. Install it correctly.
Fig. 22
5. The brewing unit cannot be detected. Install it correctly.
Fig. 23
6. Empty the residues tank.
Fig. 24
7. The right door is open, close it.
Fig. 25
8. The water tank is not assembled in place, place it properly in its position.
Fig. 26
44
9. The machine runs an auto-cleaning cycle when it is turned on.
Fig. 27
10. Install the water tank in its correct position.
Fig.28

5. CLEANING AND MAINTENANCE

Disconnect the power cord from the wall socket before cleaning. No
Do not immerse the product in water or any other fluid during cleaning.
Use a soft, dampened cloth to clean the outer part of the device.
Failure to maintain the product in clean conditions could lead to surface deterioration and
could adversely affect the product's shelf life, resulting in possible hazard.
Never use strong detergents, gasoline, abrasive powder or metal brush to clean any part of
the product.
Store the machine in a safe, dry and clean place if it is not going to be used during long periods.
Clean both the visible parts of the machine and the area beneath it in order to remove all
residues.
Cleaning of the steam tube
Insert the transparent tube into the steam tube.
Place the other tube's end inside a glass of water and place another one below the milk
dispenser.
Press ICON 9 (milk) to start cleaning.
Once the process has finished, empty the container and repeat the process until no milk rests
are observed.
Cappuccinatore
Press both sides of the steam tube and take it out from the coffee spout.
Introduce the steam tube in a glass of clean water.
Introduce the steam tube in the coffee spout.
Fig. 29
Descaling
Pour the descaling producto into a cup.
Fill the water tank with fresh water and add some descaling product.
Hold the descaling button down for 3 seconds to activate the descaling function.
The descaling solution will be dispensed at intervals.
The machine will automatically complete the descaling process.
Once all the water has been used, remove the tank and fill it with water again.
ENGLISH
POWER MATIC-CCINO 7000 SERIE BIANCA / NERA 45