Cleaning And Maintenance - cecotec Cumbia COFFEE 66 SMART Manual De Instrucciones

ENGLISH
To set the desired auto-brew start time, first press the PROG button.
Set the time you want coffee to begin brewing by using the HOUR and MIN buttons following
the same steps as the before point.
Once it has been set, the green light will flash and the LCD display will show "AUTO".
The coffee maker will automatically begin brewing at the pre-set time. When the brew cycle
begins, the red light will flash to indicate the coffee maker is operating.
Press the PRO button for 3 second to cancel the auto-brew preset mode.
STRONG function
This function is designed to brew strong and more intense coffee.
Press the STRONG button for the machine to automatically operate under this function.
From the "Normal" function, press this button to switch the machine to Strong function. The
brewing process will take longer.
Pause & serve (AUTOMATIC FUNCTION)
This function allows you to interrupt the brewing cycle and pour a cup of coffee before the
entire jar is finished brewing. When the jar is removed, the appliance will automatically stop
dripping coffee.
Warning: The maximum time the jar can be removed is 30 seconds. Do not exceed this time.
When the jar is placed again, make sure it is firmly against the back of the coffee maker.

4. CLEANING AND MAINTENANCE

Always unplug the coffee maker and allow it to cool down before cleaning.
Wash the jar and its lid together with the funnel in hot soapy water. These pieces can also be
washed on the top rack of the dishwasher.
Never use harsh or abrasive cleaners on any part of your coffee maker. To clean, simply wipe
off with a soft, damp cloth. For hard to remove stains, use a plastic mesh pad or cloth damped
in vinegar.
Warning: Never immerse the warming plate or main housing in water or any other liquid. Do
not try to clean the inside part of water tank with a cloth. This will leave a residue of lint and
may clog your coffee maker. Just rinse with cold water periodically.
Descaling cycle
Calc build-up frequently occurs in drip coffee makers. This build-up is normal and is caused
by minerals commonly found in drinking water. Periodically, your coffee maker will need
cleaning to remove scale or mineral deposits that may form. You will know when your unit will
need descaling when you notice an obvious slowdown in brewing time. It is recommended to
descale the unit with a solution of white vinegar and cold water. A solution of two tablespoons
of white vinegar to one jar of cold bottled water works best. Pour this solution into the water
37
COFEE 66 SMART