Descargar Imprimir esta página

WERKU WK402120 Instrucciones Originales página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
ENG
CE DECLARATION CONFORMITY.
declares that the WK402120 polisher
Werku
®
is in accordance with the European Directives
and Standards 2006/42/CE, 2006/95/CE,
2014/30/EU, EN60745-1:2009+A11:2010,
EN60745-2-3:2011+A2:2013+A11:2014,
EN55014-1:2006/+A1:2009+A2:2011, EN55014-
2:1997/+A1:2001/+A2:2008, EN61000-3-2:2014 and
EN61000-3-3:2013.
La Coruña, 01/02/2020
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
Class II
Protection index IP20
1000-3000 min
Electronic
-1
180x22mm
Bonnet diameter 180mm
diameter 2mm
Axis measure m14
weight 3.95 kg
Acoustic pressure LpA <70
dB(A)
Respective uncertainity KpA 3 dB(A)
Acoustic pressure LwA <80 dB(A)
uncertainity KwA 3 dB(A)
Respective uncertainity K 1.5 m/s².
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
Failure to follow all warnings and instructions
listed below may result in electrical shock, fire
and/or serious injury
instructions for future reference
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
use this polisher for other applications than those
specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
dark areas invite accidents
in explosive atmospheres, such as in the presence of
flammable liquids, gases or dusts
children and curious while operating a power tool
Distractions can cause you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
common sense when operating a power tool
Do not use a power tool while tired or under
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal.
Power 1400W
Speed rate
Disc measures
Orbit
Net
Respective
Vibration Aw <2.5 m/
Keep all warnings and all
Accidents can be
Cluttered and
Do not handle power tools
Keep away from
USE PPE'S.
Use protection glasses according EN166
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times
This enables better control of the power
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
your hair, clothing and gloves away from moving
parts
Loose clothes, jewelry or long hair can be
caught in moving parts
connecting means for extracting and collecting
dust, make sure they are connected and properly
used
The use of these devices can reduce dust
related hazards.
ELECTRICAL SAFETY.
The plug of the power tool must match with the
base of the socket
way
Do not use any adapter plug with earthed
power tools
bases will reduce the risk of electric shock
body contact with grounded surfaces such as
pipes, radiators, cookers and refrigerators
is an increased risk of electric shock if your body
is grounded
wet conditions
increase the risk of electric shock
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the
power tool
Do not
oil, sharp edges or moving parts
or entangled cords increase the risk of electric
shock
use an extension cord suitable for outdoor use
The use of an extension cord suitable for
outdoor use reduces the risk of electric shock
If the use of a power tool in a damp location is
unavoidable, use a power protected by a residual
current device (RCD)
reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before
connecting to the network, or when taking or
carrying the power tool
A
with your finger on the switch or plugging in
power tools that have the switch in "on" position
2
English
If there are devices for
Never modify the plug in any
Unmodified plugs and matching
Do not expose power tools to rain or
Water entering the power tool will
Keep the cord away from heat,
When operating a power tool outdoors,
The use of an RCD
Carrying power tools
Use
If required by
Keep
Avoid
There
Damaged

Publicidad

loading