Connecting Headphones; Working With The Unit - Steinberg Systems SBS-MD-20 Manual De Instrucciones

Idiomas disponibles

2. Slide the battery cover in the direction indicated by the arrow.

3. Insert two 9V alkaline batteries into the battery compartment according to the

polarity markings inside the unit.

4. Close the battery compartment by sliding the cover back.

5. Now the unit is ready for operation.

6. Replace the batteries when the battery level icon is not filled with color.

CAUTION!

the batteries! Batteries can be damaged and lead to destruction of electronic

components.

CAUTION!

CONNECTING HEADPHONES

1. Choosing headphones with volume control is recommended.

2. Insert the 3.5 mm plug into the headphone socket located at the bottom right

of the control panel. When the headphones are connected, the internal

speaker is disconnected.

3. Adjust the volume.

4. Set the headphones to a low volume, then adjust the volume to the

appropriate level.

3.3.

SWITCHING ON THE DETECTOR

1. Press the POWER button to turn on the unit.

Do not mix different types of batteries, or old and used batteries.

If the detector is not going to be used for a week or more, remove

Use only new batteries of the required size and voltage!

Tabla de Contenido