Seat Depth And Angle Adjustment - Permobil ROHO AGILITY Back Support Fixed Hardware Manual Del Operador

Seat Depth and Angle Adjustment

Warnings:
- If performed correctly and with caution, seat depth and angle adjustments may be made while the
individual is in the wheelchair. If you find seat depth and angle adjustments too difficult or unsafe to make
while the individual is in the wheelchair, have the individual transfer safely out of the wheelchair.
- If you choose to adjust the seat depth and angle of the AGILITY while the individual is seated in the wheelchair,
you must first take the following safety precautions:
» Make sure the wheelchair wheels are locked.
» Make sure that all hardware is securely tightened. Refer to the recommended torque specifications.
Note: Before you adjust the seat depth and the angle of an AGILITY, install the AGILITY on the wheelchair. See "AGILITY Installation".
To Adjust the Seat Depth
1. Use the Allen wrench to loosen the depth/
angle adjustment bolts approximately three
(3) full rotations.
4. Angle Adjustment:
a. If the AGILITY is not yet adjusted to the desired angle, continue to the next section, "To Adjust the Angle".
b. If the AGILITY is already adjusted to the desired angle:
While you hold the back shell in position, use the Allen wrench to tighten the right and left
depth/angle adjustment bolts, turning until snug + one-quarter turn.
Note: If a torque wrench is available, tighten the bolts to 60 ± 4 inch-pounds (7 ± 0.5
Newton-meters).
ROHO AGILITY Fixed Hardware Operation Manual
2. Slide the back shell forward or backward
to the desired depth. Note: If the triangle
bracket will not slide, see "Troubleshooting".
9
Markers for Seat Depth
Markers for Angle
IMPORTANT! To make sure the depth
3.
positions on both sides are equal, compare
the markers on the tops of the triangle
brackets.