Connecting A Subwoofer - Cyrus AV Master 8.0 Surround Decoder Manual De Instrucciones

User Instructions Cyrus AV Master 8.0

Connecting a Subwoofer

A subwoofer may be connected with a suitable phono interconnect to the
1#
Subwoofer output . Refer to the 'Setting up the AV Master 8.0' section to
switch on and set up the subwoofer.
+12V trigger
The +12V trigger output will drive any automated devices you may have in
your system which have a compatible trigger input marked for +12V
operation. These may include video display screens, motorised curtains etc.
To connect to the trigger output a cable of suitable length will be required,
1@
terminated in 3.5mm mini-jack plugs. Connect one plug to the +12V output
of the AV Master 8.0, and the other plug to the +12V input of your automated
device. When the AV Master 8.0 is switched on from standby, the +12V feed
will switch on and activate your automated devices.
MC-BUS Connections
a
Connecting the MC-Bus sockets of the AV Master 8.0 in an MC Bus
system provides unified system power control. An MC Bus loop is established
by connecting single phono cables from the MC Bus output of one unit to the
MC Bus input of another. Complete the loop by returning the MC Bus output
of the final component to the MC Bus input of the first. The drawing below
shows an example of MC-Bus wiring for a Cyrus AV Master 8.0 with a DVD
player and two power amplifiers.
With MC-BUS established the power function of all connected Cyrus
components may be controlled from the AV Master 8.0 front panel or remote
control. When power is switched on, components such as power amplifiers
will switch on automatically.
When a Cyrus stereo integrated amplifier or pre-amplifier is connected into
the MC-BUS loop, setting of the volume calibration level will take place
automatically when the VI/AV input is selected at the Cyrus stereo amplifier.
Cyrus AV Master 8.0
Cyrus DVD player
Cyrus Tuner
Cyrus Power amplifier
GB
GB
3