Remote Control Operation - Cyrus AV Master 8.0 Surround Decoder Manual De Instrucciones

Cyrus AV Master 8.0

REMOTE CONTROL OPERATION

Supplied handset
The remote control handset supplied with the AV Master 8.0 will control all
functions, apart from setup menu navigation as this requires the user to be
positioned at the front panel to read the display.
1#
STANDBY
1@
1!
DSP
1)
NIGHT
i
DIRECT
SURR
LEFT
INPUT-
1. MUTE. Mutes the sound from all speakers instantly. Press this key again
to unmute.
2. LIP SYNC. This key will enable you to delay the sound from all speakers
if the soundtrack of the movie you are watching is not synchronized to the
picture. This happens because of digital video processing delays that
occur in your DVD player or TV monitor and you will notice that actors
voices are not synchronized with their lip movements. To adjust Lip Sync
delay and correct this, press the key once and use the ADJ+ and ADJ-
keys to adjust delay until the sound and picture are correctly
synchronized. Press the Lip Sync key again to exit Lip Sync adjustment.
3. TONE CONTROLS. Use the BASS or TREBLE keys to select Bass or
Treble adjustment. Use ADJ+/ADJ- to increase or decrease the level of
bass or treble. Press the BASS or TREBLE key again to cancel tone
control setting.
NOTE:- Tone control settings are stored separately for each input.
4. ADJ+/ADJ-. These keys are used to adjust settings or choose options
from a list on the display.
5. SPEAKER HOT KEYS. These keys are each labeled with a sound
channel. If you want to make an adjustment to the level setting of an
individual channel (or the sub-woofer), select the correct channel key
from the keypad, then use the ADJ+/ADJ- keys to change the setting.
Press the channel select key again to exit channel adjustment.
6. NOISE. Press the noise key to switch on a noise fed equally to all system
speakers. This noise will enable you to set all channels to equal volume
level from your sitting position. Cyrus recommend setting the centre
channel level to 0dB as a reference, then adjust each channel in turn to
the same level as the centre channel.
7. INPUT SELECT. Press one of these keys to select an input source from
those available.
8. VOLUME. These keys will adjust the volume level from all speakers and
the sub-woofer.
9. DIRECT. When playing a stereo program from an analogue input, setting
stereo will completely bypass the digital section of the decoder in 'Stereo
Direct' mode for the highest quality two-channel sound. Once Stereo
Direct has been enabled for a particular input, the setting will be stored
and recalled in future when that input is selected.
NOTE:- Selecting 'Stereo Direct' will bypass all effects and tone control
settings.
6
a
MUTE
b
LIP
MODE
SYNC
c
BASS ADJ+
d
ADJ-
TREBLE
CENT
FRONT
e
SURR
NOISE
RIGHT
f
SUB
g
INPUT+
VOL+
h
VOL-
10. NIGHT. The NIGHT key will optimize the dynamic range of the music for
late night listening at low levels. Note: The NIGHT key only operates for
Dolby Digital encoded material.
11. DSP. When playing a two channel stereo program source such as a CD
or a tuner, pressing the DSP key will cycle through a selection of
surround effect simulations that add ambience and reverberation to the
sound by using the other system speakers.
12. MODE. This key has two functions. When playing a digital multi-channel
program, pressing this key will cycle through available decoding sub-
options. When playing a two-channel program, pressing this key will
cycle through different decoding modes. Choose from Stereo, Dolby Pro
Logic IIx Movie, Dolby Pro Logic IIx Music, DTS Neo 6 Movie, DTS Neo 6
Music.
Once a decoding mode has been set for a particular input, the setting will
be stored and recalled in future when that input is selected.
13.
STANDBY. Sets the AV Master 8.0 in and out of Standby.
Cyrus system handsets
If your system includes other Cyrus products you may already own a Cyrus
system handset that will also control certain functions of the AV Master 8.0.
Refer to the handbook for the system handset or to the Cyrus website
www.cyrusaudio.com for a list of commands available to control the AV
Master 8.0.
User Instructions
GB
GB