Descargar Imprimir esta página

Inserting And Removing Burs; Important - Dentsply Sirona Midwest Tradition TB Manual Del Operador

Turbina con conexión fija

Publicidad

Idiomas disponibles

Idiomas disponibles

Instructions for Use Midwest Tradition / Tradition Pro / Quiet-Air
67 27 155  D3673.201.10.02.02
5.2

Inserting and removing burs

IMPORTANT: Check the push button to make sure it moves freely!
NOTE!  Use only burs and diamond polishers that are sharp and
undamaged. Use clean burs and diamond polishers to avoid dirt in
the clamping system.
CAUTION!  A loose or partially removed bur can detach itself from
the head or break off. This may cause injury! Therefore, use the high-
speed handpiece only if the bur is inserted at least 10 mm and is
clamped securely in place.
CAUTION!  A loose or partially removed bur can become detached
from the head or break off. This leads to a risk of injury. Operate the
high-speed handpiece only with the clamping lever closed.
CAUTION!  Stop using the high-speed handpiece if the clamping
lever does not stay closed by itself. If the chuck system is not
completely closed, the mechanism may be activated and lead to
5 Operation
31

Publicidad

loading