TOKIT Omni Cook Manual De Instrucciones De Uso página 9

Measuring cup
Mixing bowl lid
Sealing ring
Mixing blade
Sealing ring
Mixing bowl body
Lock ring
Rotate anti-clockwise to
unlock the lock ring
Handle block
Mixing blade set
CAUTION
For your safety and better cooking experience, please read the following contents:
1.The mixing blade set has sharp blades, please be careful not to cut yourself when mounting/dis-
mounting/handling /cleaning it.
Never touch the blades of the mixing blade set.
Always dismount the mixing blade set with the opening of the mixing bowl facing upwards, avoid
dropping the mixing blade set, otherwise it may cause blade deformation and injury.
Do not put your hand into the mixing bowl before it has been removed from the main engine
frame.
Make sure the mixing bowl and the mixing blade set have been fully cooled down before
dismounting the mixing blade set from the mixing bowl. Residual heat after cooking could cause
scalding.
2.Mount the mixing blade set carefully and properly, and regularly check its service condition and
the contact of the sealing ring with the bottom of the mixing bowl.
Lock ring
1
Grip the mixing bowl handle, and ensure that its
open side is upward.
2
Rotate the lock ring anti-clockwise to unlock it,
while leaving the mixing blade in the mixing bowl
for the time being.
3
Carefully pinch the handle block at the top of the
mixing blade and pull it (together with the sealing
ring) out of the mixing bowl.
4
The mixing blade is sharp.Please be careful not to
cut yourself when cleaning the mixing blade set.
Wipe off water from the blade set after cleaning.
5
Carefully pinch the handle block at the top of the
mixing blade and align it with the sealing ring to
the opening at the bottom of the mixing bowl.
Then, mount it into the bottom opening until the
sealing ring touches with the bottom of the mixing
bowl.
6
Mount the lock ring from below through the drive
shaft of the mixing blade to the mixing bowl and
rotate it clockwise until the mixing blade set is
securely locked.
07