Firmware Update - Cebora WIN TIG AC-DC 230 M Manual De Instrucciones

9�3�4

Firmware update

The machine can be updated using a USB memory stick (pen drive) inserted into the USB port on the back of the
panel board. To extract the panel board, simply remove the 4 retaining screws (see figure). The operation must be
carried out with the machine not powered.
♦
Insert the USB memory stick (machine not powered).
♦
Switch on the power source and wait for the update to run.
♦
Once the update has been completed, switch off the power source, remove the USB memory stick and tighten
the four retaining screws.
Information on the firmware version installed is provided in the home screen that appears when the welding power
source is switched on or in section
To download firmware updates, go to:
https://welding�cebora�it/it/assistenza/documentazione
3301286
61/65