Hose Connector - Mafell P1cc Manual De Instrucciones

4.6 Hose connector

The machine is delivered with a hose connector and a chip deflector. Use the hose connector to connect a
suitable external extraction device. Use the chip deflector if you cannot suck off the developing dust. The
deflector directs the dust away from the user. Both parts can optionally be mounted on the base plate of the
machine.
Use the following procedure to change the hose
connector or the chip deflector:
1. Press the two spring arms (6) together and pull
out the hose connector or chip deflector from
the rear.
2. When assembling, push the hose connector or
chip deflector into the opening at the rear end of
the base plate until the spring arms (6) lock into
place on their own.
Hose connector or chip deflector changed.
✓
For sawing under the table, the chip deflector can be rotated through 180° when it is
installed.
14
Fig. 7: Changing hose connector or chip deflector
P1cc
11/2021