Introduction - Stanley PNT1000L-PC Manual De Instrucciones

E N G L I S H

Introduction

The PNT1000L-PC is a lightweight tool for installing POP® brand POP NUT™ blind rivet nuts and other blind threaded inserts
by adjusting the setting force to the insert being installed rather than stroke like traditional blind rivet nut tools. Controlling
the setting force has the following benefi ts:
• No stroke adjustment is needed for the same nut in multiple application grips.
• Eliminated application & nut damage due to "double stroking".
• Proper set achieved even with a small gap between the nut fl ange and Nosepiece.
Table 1 lists the POP NUT™ blind rivet nuts that can be fastened using this tool. The Nosepiece and Mandrel must be
changed to fi t some sizes of POP NUT™. (See Table 5, Mandrel and Nosepiece Requirements table in the Specifi cation section)
Table1: POP NUT™ blind rivet nut range
Thread
Size
M6X1.0
¼-20
M8X1.25
5/16-18
M10X1.5
3/8-16
M12X1.75
1/2-13
* Need to set tool at 0.55 MPa [80 psi] Minimum.
4
Aluminum
-
-
Material
Steel
*
RLT Stainless
-
-
*
-