Residual Risks; Setup / Adjustment; Mains Connection; Tool Selection - Mafell FM1000 Instrucciones De Funcionamiento Y Seguridad

3.6 Residual risks

The existing residual risks include:
- Breakage and ejection of the tool or parts of the tool.
- Impaired hearing when working without hearing protection for long periods of time.
- Emission of harmful wood dusts during longer operation without extraction.
4

Setup / adjustment

4.1 Mains connection

Prior to starting up the machine, check to ensure that the mains voltage corresponds to the operating voltage
specified on the rating plate of the machine.

4.2 Tool selection

Use only the collet chucks listed in the chapter "Special accessories". The tools are selected as a function of
the materials to be machined, taking into account the performance of the feed drives. Take into account the
performance of the milling motor when you select the maximum tool diameter and the intended machining
depth.
12
Warning
Risk of injury when working with the machine
Even when the machine is used as intended and in compliance with the safety
regulations, there are still residual risks caused by the intended use, which can
have consequences for your health.
Observe the safety instructions and information in these instructions.
➢
Always be extremely careful and cautious when you work with the machine.
➢
FM1000
01/2022