General Safety; Intended Use; Foreseeable Misuse - Mafell FM1000 Instrucciones De Funcionamiento Y Seguridad

FM1000
3

General safety

Please read all safety instructions and directions. Failure to comply with the safety instructions and
directions can cause electric shock, fire and/or serious injuries. Please retain all safety instructions and
directions for future reference.

3.1 Intended use

The milling motor is intended for stationary installation in a guiding gantry system with a collar size of ø 43 mm
[1.69 in].
Intended use also requires the guiding gantry system to be included.
The milling motor can be operated with cutter diameters that are compatible with the collet chucks listed in the
special accessories. Wood, plastic and non-ferrous metals can be machined. The cutting data must be
selected such that the motor is not overloaded.

3.2 Foreseeable misuse

The machine is not intended for any other use than the intended use listed above.
The manufacturer is not liable for any damage resulting from such other use.
To use the machine as intended, comply with the operating, maintenance and repair conditions specified by
MAFELL.
Foreseeable misuse also includes:
- Tampering with, removing and/or bypassing safety devices of any kind.
- Operating the machine without safety devices.
- Non-observance of safety and warning instructions in the operating instructions.
- Removing the safety and warning labels from the machine.
- Operating the machine by unauthorized persons.
- Failure to follow prescribed maintenance and care instructions.
- Machining with excessive cutting depth or feed rate due to excessive motor load.
- Using the machine in continuous industrial operation.
- Using the machine as a hand-guided milling motor.
Never use:
- Damaged and/or deformed tools.
- Blunt drill bits as they impose an excessive load on the motor.
- Tools that are not suitable for the no-load speed of the milling motor.
8 01/2022