Collet Chucks - Mafell FM1000 Instrucciones De Funcionamiento Y Seguridad

FM1000

4.3 Collet chucks

Tightening the union nut excessively without an inserted tool can compress and thus damage the collet
chuck.
Tighten the union nut only when a tool is inserted.
➢
➢ To protect the thread, screw the union nut only lightly onto the milling spindle when there is no tool
inserted.
Information for using the collet chucks:
- Ensure that you use the correct cutter size for the collet chucks.
- To prevent the collet chucks from binding, oil them a little at the beginning and after prolonged use.
- To improve the concentricity, lightly grease the collet chucks or use a solid lubricant (for example Molykote
P-40).
- Using a square piece of wood or a rubber mallet (never a metal tool!), tap lightly from behind on the collet
chuck to loosen it if it is jammed.
Use the following procedure to mount a collet
chuck:
1. Click the collet chuck into the union nut.
2. Screw the union nut onto the milling spindle.
Collet chuck mounted.
✓
01/2022
Notice
Fig. 3: Mounting the collet chuck
13