FONESTAR ZS-2000M Manual De Instrucciones página 11

Figure 5 Schematic Diagram of the ZS-2000M Zone Selection Buttons and State Indicator Lights
1 - Zone state indicator light:
- A solid yellow light indicates the zone loudspeaker circuit has either experienced a short circuit or has
been disabled.
- A flickering yellow light indicates a zone loudspeaker circuit has an open circuit.
- In the public address mode, a green light indicates the system is currently broadcasting.
- In the emergency broadcasting mode, a red light indicates the system is broadcasting a fire
emergency evacuation message.
- A flickering green light indicates that a zone has been selected. The light is off when the zone is not
broadcasting or is not selected.
- If a zone is selected and no other operation is performed for more than one minute, the indicator light
automatically returns to its original state..
2 - Zone fire alarm indicator light: red light indicates the ZS-2000M has received fire alarm evacuation
signals.
Green light indicates the ZS-2000M has received fire alarm alert signals..
3 - Zone selection button: this button is used to select a zone. The selection is canceled when the button
is pressed a second time.
4 - Zone description label: user can write or print the zone names on labels that can be inserted in the
corresponding zone indentation.
The light turns off when the broadcasting time delay finishes or the DELAY button is pressed.
- 11 -
EN