Product Components; System Structure - FONESTAR ZS-2000M Manual De Instrucciones

EN

PRODUCT COMPONENTS

The system includes the following product components:
- ZS-2000M Main Control Unit
The ZS-2000M is control equipment in the Digital Public Address and Voice Alarm System designed for
expanding the number of loudspeaker zones, and can support multiple sound source files for broadcas-
ting. The system integrates with functions such as the sound source file storage system, the audio bro-
adcasting system, the loudspeaker zone control system, and the system for monitoring and diagnosing
faults. The system integrates well and is easily configured.
- ZS-1500/ ZS-2250/ ZS-4125 Class-D Amplifier
In the system, the ZS-1500/ ZS-2250/ ZS-4125 is used to amplify audio signal power and drive many
broadcasting loudspeakers.
- ZS-200M Paging Microphone
The ZS-200M connects to the system and related devices to transmit audio and control information through
the Ethernet network. The ZS-200M is used for paging, controlling broadcasts, monitoring zones, and for
using the bidirectional intercom function.
- ZS-4328IO IO Interface
ZS-4328IO is an external interface expansion control equipment in the Public Address and Voice Alarm
System. It has many kinds of audio interfaces and control ports , so as it can send the audio and control
signal which from the peripheral equipment through an Ethernet network to the system.
- The config software
The config software is usually used for hardware function setting. As the default factory setting only
provided the most basic functions. Only through the config software can set the advanced functions base
on the user's needs, include device base parameter setting, fault diagnosis, tasks playing operations button
functions, etc.
The config software ware can be configured online or offline. If the software is configured offline, the
configuration data is saved as a project file. The configuration file is uploaded to the device system, once
the configuration software has been installed on a computer and that computer is connected to the system.
After the system receives the configuration data, the system reboots automatically to allow the
configuration settings to take effect

SYSTEM STRUCTURE

Figure 1 shows the schematic diagram of the Digital Public Address and Voice Alarm System basic structure.
As the number of the devices increases, the ZS-2000M, ZS-1500/ ZS-2250/ ZS-4125, ZS-200M, ZS-4328IO
will make up the larger public address system through an Ethernet network.
Figure 1 Schematic Diagram of the System basic structure
- 4 -