Additional Safety Warnings - VONROC CS504DC Traducción Del Manual Original

n) To prevent accidental operation of the saw
chain, this chain saw is equipped with a switch
with mechanical interlock. To operate the chain
saw, the locking button must be pressed before
the saw chain starts operating
- Do not use the product without pressing the
locking button.
- Do not operate this tool with only one hand.
Hold the product securely with both hands;
one hand to hold the product securely and
the other to operate the On/Off switch.
o) Never allow children, persons with physical,
sensory or mental limitations or a lack of
experience and/or knowledge and/or people
unfamiliar with these instructions to use the
machine. Local regulations may restrict the age
of the operator.
p) Children should be supervised to ensure that
they do not play with the machine.
q) When not in use store the telescopic chain saw
out of reach of children.
r) Before operation, check the work area and
remove all possible hazards.
s) Always wait until the machine has come to a
complete stop and remove the battery, before
placing the machine down. The saw chain can
jam or kickback and lead to loss of control over
the machine.
t) Switch off the chain saw when changing the
working position.
u) A cut branch can lead to personal injury by fall-
ing on you or springing back from the ground.
Cut longer branches in sections.
v) Reduce force before the branch is completely
cut off. You can get injured when losing balance
and control of the chain saw.
w) Do not hang the product in a tree when you
are not using it. Always place the tool on the
ground in a safe place without removing the
battery.

ADDITIONAL SAFETY WARNINGS

a) This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
WWW.VONROC.COM
b) When working with the machine, always hold it
firmly with both hands and provide for a secure
stance. The power tool is guided more secure
with both hands.
c) Always ensure all handles and guards are fitted
when using the machine. Never attempt to use
an incomplete machine or one fitted with an
unauthorized modification.
d) Always lubricate the saw chain with protective
spray before use.
e) Always wait until the machine has come to a
complete stop before placing it down.
f) Other persons and animals should remain at a
distance of 3 meters or more when the machine
is being used. The operator is responsible for
third persons in the working area.
g) Never grasp the saw chain.
h) Children or persons unfamiliar with these
instructions must not operate the chain saw.
Local regulations may restrict the age of the
operator.
i) The user is responsible for accidents or hazards
occurring to other people or their property.
j) Do not operate the chain saw when barefoot or
wearing open sandals, always wear substantial
footwear and long trousers. The use of sturdy
gloves, non-skid footwear and safety glasses
is recommended. Do not wear loose clothing or
jewelry which can be caught in moving parts.
k) Thoroughly inspect the area where the chain
saw is to be used and remove all wires and
other foreign objects.
l) Prior to operation, check saw chain, bar, and
bolts for wear or damage. Do not operate with a
damaged or excessively worn chain saw.
m) Know how to stop the chain saw quickly in an
emergency.
n) Use the chain saw only in daylight or in good
artificial light.
o) Never operate the chain saw with defective
guards or without the guard in place.
p) Never hold the chain saw by the guard.
q) When operating the telescopic chain saw,
ensure to keep proper footing and balance at
all times.
r) Always be aware of your surroundings and stay
alert for possible hazards that you may not hear
whilst operating the chain saw.
s) Keep all nuts, bolts and screws tight to ensure
that the chain saw is always in a safe working
condition.
EN
9