Insert the Leads into the OR Cable Connector
You can insert the leads into the OR Cable Connector with the steering cap on or off.
1. To insert the lead with the steering cap on:
a. Pull the stylet out slightly.
Steering Cap
Stylet
Steering Cap
Stylet
b. Slide the stylet through the side
slot in the OR Cable connector.
A C
B
Slide
Slide
2. Insert the lead into the port of the OR Cable connector until it stops.
Slide
Insert
A C
B
D
Lead
Lead
D
Slide
Insert
1. To insert the lead with the steering cap off,
remove the steering cap from the stylet.
A C
B
D
Instructions for Use
Clinician Trial Manual
90655448-03 REV B 6 of 120