Operating Controls - VDO MTCO 1324 Instrucciones De Servicio

Operating controls

a) "Blocked drawer"
b) "Hinged drawer"
Note
The operation of both device designs is, in
principle, identical. Operating steps which
deviate from the normal procedure are listed
separately.
1) Left-hand keypad
Key for unlocking the drawer.
Key for adjusting the time group for
driver 1.
2) Right-hand keypad
Key for adjusting the time group
for driver 2.
Key for selecting the following
functions:
• "Time Adjustment",
see page 31.
• Display "Error Memory",
see page 32.
Keys for adjusting the time and for
displaying the current error mes-
sages.
26
(Page 2, figure I)
3) Display
• The basic display is shown perma-
nently.
• Messages / notes are displayed auto-
matically, see page 32.
4) Separating plate
between driver 1 and driver 2 chart.
5) Checkpoint marking
for checking the temporally correct
position of the chart carrier.
6) "Pear-shaped" chart carrier
7) Nameplate
The manufacturer, device type,
inspection mark and serial number are
indicated here.
Date + time
Chart + time group
symbol, driver 2
Error symbol
Total kilometre reading
Chart + time group
symbol, driver 1
Kienzle MTCO 1324