Recording Of Failures; Appendix; Compulsory Inspection Of Tachographs; Maintenance And Cleaning - VDO MTCO 1324 Instrucciones De Servicio

Recording of failures

Power loss
In case there is power available again, the
tachograph will draw a line (1) on the chart
shortly after the vehicle has started to move.
Pulse generator disconnection
Failure of the transmission link between
pulse generator MTCO 1324:
• As soon as the vehicle stands still, the
marker (2) is shown; during ride,
v-recording continues.
or

Appendix

Compulsory inspection of tacho-
graphs
The vehicle owner is obliged to have the
installed Kienzle MTCO 1324 inspected at
regular intervals.
At least once every two years, the proper
operation of the tachograph has to be
tested, e.g. in conjunction with the technical
inspection of your vehicle.
Please ensure that the installation plate is
replaced at each inspection and contains
the information required.
© Continental Automotive GmbH
(Page 151, figure VIII)
• The marker (3) is displayed immediately
Device failures
Failures in the recording mechanism may
cause the following recording errors:
• Marker (4), defect within the v-recording
• Marker (5) and (6), defect within the

Maintenance and cleaning

The Kienzle MTCO 1324 is equipped with
modern, maintenance-free technology. For
this reason, preventive maintenance work is
not required.
In case they are dirty, you may clean the
housing, the display and the function keys
by means of a slightly moistened cloth. In
case this proves not sufficient, special
cleaning or preservative agents for plastics
may also be used.
after the failure and remains there, until
the cause of the failure has been rem-
edied.
mechanism.
recording mechanism for the time group
and distance record.
39