Error Code - Overview - VDO MTCO 1324 Instrucciones De Servicio

Error code - Overview

Displayed message
(Time is flashing)
(Colon is not flashing)
© Continental Automotive GmbH
Code Meaning / measure
= • The MTCO 1324 has automatically changed
over to the beginning or the end of the daylight
saving time,
• or the time has been adjusted with the chart
inserted.
or Note: Update the chart carrier settings,
see page 34.
= Error during chart carrier settings update
Update the chart carrier settings once again,
see page 34.
= Error in the driving mechanism of the chart carrier
Check whether the charts have been correctly
inserted.
= Trip without driver 1 chart
(Error code cannot be found in the error memory.)
Insert driver 1 chart.
= Driver 1 chart is missing
= Driver 2 chart is missing
(This message will appear when switching from "
to " ", for example, while the chart is missing.)
Insert chart(s).
= Error during CAN transmission
= Internal error
= Keypad error, key pressed too long or blocked
= LCD error (display)
= Error at the drawer
Start the ejection procedure and close the
drawer again afterwards.
To be continued on the next page
"
33