Indel B SW PLEIN AIRCON 12V Instrucciones De Montaje, Uso Y Mantenimiento página 55

If there is none, the opening must be madefollowing a few important instruction:
Before performing any cuts on the bodywork, DISCONNECT the battery of the vehicle,
DISCONNECT each power supply terminal, and make sure that any current generator is OFF.
Verify that the roof section where the opening is to be made, does not have any electrical wiring.
While making the opening, remain in the spaces between the roof ribs without removing them.
To facilitate the cutting operations, use the supplied template.
Seal carefully any existing or new hole or opening in order to avoid possible water leakage.
Seal with a suitable, flexible, non-hardening product, e.g. "SikaLastomer-710", "Selleys Butyil Mastic",
"Vaber SP5" or similar products.
If the trapdoor has been removed, remove the old seal and, in any case, thoroughly clean the roof
surface around the opening and remove any residue.
53 OFF IS A BRAND OF INDELB
S ens o di marcia
Drive way
EN