Troubleshooting - cosori Pro LE Serie Manual Del Usuario

EN

TROUBLESHOOTING

Problem
The air fryer will not turn
on.
Foods are not completely
cooked.
Foods are cooked unevenly.
Foods are not crispy after air
frying.
French fries are not fried
correctly.
Basket will not slide into the
air fryer securely.
White smoke or steam is
coming out of the air fryer.
Dark smoke is coming out of
the air fryer.
The air fryer has a plastic
smell.
Display shows Error Code
"E1".
Display shows Error Code
"E2".
Display shows Error Code
"E3".
If your problem is not listed, please contact Customer Support (see page 17).
16
Make sure the air fryer is plugged in.
Push the basket securely into the air fryer.
Place smaller batches of ingredients into the inner basket. If the basket is
overstuffed, then ingredients will be undercooked.
Increase cooking temperature or time.
Foods that are stacked on top of each other or close to each other need to
be shaken or flipped during cooking (see Shaking Food, page 13).
Spraying or brushing a small amount of oil on foods can increase
crispiness (see Cooking Guide, page 14).
See French Fries, page 14.
Make sure the basket is not overfilled with food.
The air fryer may produce some white smoke or steam when you use it for
the first time or during cooking. This is normal.
Make sure the basket and the inside of the air fryer are cleaned properly
and not greasy.
Cooking greasy foods will cause oil to collect beneath the crisper plate.
This oil will produce white smoke, and the basket may be hotter than
usual. This is normal, and should not affect cooking. Handle the basket
with care.
Immediately unplug your air fryer. Dark smoke means that food is burning
or there is a circuit problem. Wait for smoke to clear before pulling the
basket out. If the cause was not burnt food, contact Customer Support
(page 17).
Any air fryer may have a plastic smell from the manufacturing process.
This is normal. Follow the instructions for a Test Run (page 10) to get rid of
the plastic smell. If a plastic smell is still present, please contact Customer
Support (see page 17).
There is an open circuit in the temperature monitor. Contact Customer
Support (see page 17).
There is a short circuit in the temperature monitor. Contact Customer
Support (see page 17).
Turn off and unplug the air fryer and allow it to cool completely. If the
display continues to show "E3", contact Customer Support (see page 17).
Possible Solution