Care And Maintenance; Cleaning Unit; Air Filter - HTW W2 Manual De Usuario E Instalacion

Care and maintenance

Always turn off the air conditioner and main power supply before cleaning
to ensure safety.

Cleaning unit

1. Cut power off before cleaning.
Plug out only
after air con-
ditioner stops
at all.
2. Use soft cloth when cleaning cabinet. If
the cabinet is very dirty, dip cloth into
warm water below
40°C, dry the cloth
and then rub off the
dirt.
3. Don't use gas, benzene, solvent, wash,
chemical solvent, etc. for cleaning.
4. Do not splash water directly into the
unit, in which there are micro-computer
and circuit
plate, they
must not
bedrenched
with water.
* Check earth wire
Is it broken
or loose?
The air filter behind the intake grille should be
washed at least once every two weeks or as
often as it needs cleaning.
How to clean the air filter
1. To remove the air intake grille, grasp the tab
Dry the cloth
by hands be-
2. Vacuum the filter on the dusty side to
fore cleaning.
remove light dust.
3.
4.
Let the filter dry thoroughly before reinstalling
Accident could
happen. it. If necessary, please ask the professional
personnel to clean it.
* Check if air inlet and outlet of the unit are
blocked or not.
50

Air filter

on the filter and
pull to take out.
Wash the filter, cleaner side up under gently
flowing water to wash out accumulated dust
and lint.
If the filter is very dirty, use a mild household
detergent in the wash water.
Air lock could
result in bad
efficiency
Vacuum cleaner