Product Safety - KRESS Mission KR233E Manual Del Usuario

Product safety

General safety warnings
WARNING: Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Carefully read the instructions for the safe
operation of the machine.
Save all warnings and instructions for
future reference.
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
- Children should be supervised to ensure that
they do not play with the appliance.
- This appliance contains batteries that are only
replaceable by skilled persons.
WARNING: For the purposes of recharging
the battery, only use the detachable supply
unit provided with this appliance.
IMPORTANT
4
READ CAREFULLY BEFORE USE
EN
KEEP FOR FUTURE REFERENCE
Safe operation practices
Training
a) Read the instructions carefully. Make sure you
understand the instructions and be familiar
with the controls and the proper use of the
appliance.
b) Never allow people unfamiliar with these
instructions or children to use the appliance.
Local regulations can restrict the age of the
operator.
c) The operator or user is responsible for
accidents or hazards occurring to other
people or their property.
Preparation
a) Confirm that the virtual boundary is
established as instructed and the virtual
boundary is regularly maintained. Before each
working cycle, the machine goes around the
working area to check whether the virtual
boundary exists, if it does not exist, the
machine will shut down. The virtual boundary
specifies the work area where the machine is
allowed to operate. The RTK antenna in the
machine senses when it is approaching the
virtual boundary. When the machine hits an
obstacle or approaches the virtual boundary
the product selects a new direction.
b) Periodically inspect the area where the
appliance is to be used and remove all
stones, sticks, wires, bones, and other
foreign objects.
c) Periodically visually inspect to see that the
blades, blade bolts and cutter assembly
are not worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve
balance.
d) On multi-spindle appliances, take care as
rotating one blade can cause other blades to
rotate.
e) WARNING! The lawnmower shall not be
operated without the guard in place.
Operation
1. General
a) Never operate the appliance with defective
guards, or without safety devices, for
example deflectors, in place.
b) Do not put hands or feet near or under
rotating parts. Keep clear of the discharge
opening at all times.
c) Never pick up or carry an appliance while the
motor is running.
d) Operate the disabling device from the
appliance
- Before clearing a blockage;
- Before checking, cleaning or working on the
appliance;
- After striking a foreign object to inspect the
machine for damage;
- If the machine starts to vibrate abnormally,
and to check for damage before restarting.
e) It is not permitted to modify the original
design of robotic lawnmower. All
modifications are made at your own risk.
f) Start robotic lawnmower according to the
instructions. When the power is on, make
sure you keep your hands and feet away from
the rotating blades. Never put your hands
and feet under the mower.
g) Never lift up robotic lawnmower or carry it
when the power is on.
h) Do not let persons who do not know how
robotic lawnmower works and behaves use
the mower.
i) Do not put anything on top of robotic
lawnmower or its charging base.
j) Do not allow robotic lawnmower to be used
with a defective blade disc or body. Neither
should it be used with defective blades,