Changing The Saw Blade - Mafell K65 18M bl Instrucciones De Funcionamiento Y Seguridad

K65 18M bl/KSS60 18M bl

4.6 Changing the saw blade

Use the following procedure to change the saw
blade:
1. Pull the rechargeable battery out of the
machine.
2. Put the machine on a flat surface.
3. Press and hold the pushbutton (8).
4. Pull the locking lever (3) upwards.
The operating lever is locked. The
➢
mechanism that locks the saw shaft is
activated.
5. To move the movable guard to the maximum
open position, either use the pre-feed lever (12)
or do it manually.
To remove the saw blade, manually hold
➢
the guard in the open position.
01/2022
Caution
Risk of injury from the sharp saw blade
The saw blade is sharp. You can hurt yourself when you change the saw blade.
Wear protective gloves when you change the saw blade.
➢
Be careful when you change the saw blade.
➢
Fig. 8: Locking the saw shaft
Fig. 9: Opening the guard
17