Bell & Ross BR 03-92 A522 Guia De Inicio Rapido página 3

ENGLISH
BR 03-92 A522
LTD 999 PCS
BR-CAL.302
Movement : mechanical with automatic winding. Calibre BR-CAL.302. Power reserve approximately 40 hours.
quickset. Time-setting with hacking function.
GENERAL USE
Starting the watch
When the watch has stopped (crown in position 0): wind the movement by
rotating the crown clockwise. After approximately 40 rotations, the watch is
fully wound (the winding mechanism does not have a stop to prevent over-
winding). The power reserve is approximately 40 hours when fully wound.
When the watch is worn , the automatic mechanism will wind the movement.
Setting the time. Pull the crown out to position 2. The seconds hand will
stop, enabling you to set the time to the nearest second. Set the time by
rotating the crown in the required direction.
STRAP MOUNTING
Attachments with no visible screws
A spring bar is used to fit the strap to the case
attachments. This bar must be removed carefully
using the appropriate tool provided with the watch
in the box.
IMPORTANT
Magnetic fields. Magnetic fields can adversely affect the accuracy of your
watch. Also, we would recommend that you avoid placing your watch near
electronic devices that may generate large magnetic fields (radio, smart-
phone, television, computer, tablet, loudspeakers, etc.).
: the slotted screws mount the bezel to the case and ensure the water
NOTE
resistance of the watch. To benefit from the Bell & Ross warranty, these
screws must never be unscrewed.
MAINTENANCE
After being immersed in seawater, it is recommended to carefully rinse off
the watch and strap with fresh water. It is also recommended to have the
water resistance of your watch checked every two years. To ensure a service
Case : 42 mm in width.
Minute hand
Hour hand
Seconds hand
Date
Functions
Setting the date
Quick setting
Crown in position 1: pull the crown out to position 1 and set the date by
turning the crown anticlockwise.
a date function, quickset date setting MUST NOT UNDER ANY CIRCUMS-
TANCES be carried out between the times of 9 PM (21.00) and 3 AM (3.00).
Slow setting
Crown in position 2: to ensure the date changes at midnight rather than
noon, it is recommended to set the date by adjusting the hands of the watch.
Pull the crown out to position 2 and turn the hands until the date changes.
Then set the precise time.
0 1 2
that meets the brand's exacting standards, any servicing of your watch must
be carried out by the Bell & Ross service centre or a watchmaker approved
by Bell & Ross. Whenever repairs are made during the warranty period, you
must present the Bell & Ross warranty card, duly dated and signed by the
retailer at the time the watch was purchased.
INTERNATIONAL WARRANTY
To benefit from your 2-year international warranty, your card must be acti-
vated at the time of purchase by your approved Bell & Ross point of sale, and
presented every time an operation is performed. You can now access the
digital version of this card and all the information relating to your watch by
scanning the QR code or visiting:
To ensure a service that meets the brand's exacting standards, any servic-
ing of your watch must be carried out by the Bell & Ross service centre or
a watchmaker approved by Bell & Ross. The warranty does not, however,
include:
. Any damage caused by accidents or by inappropriate or improper use of the
watch (e.g. violent impacts, crushing, rough handling of the clasp).
. Any damage caused by repair or disassembly operations carried out by a
retailer or after-sales service centre not approved by Bell & Ross.
. The consequences of the watch and bracelet/strap ageing and normal wear
and tear.
3
: hours, minutes and seconds. Date with
: as with all mechanical watches with
NOTE
Crown
www.bellross.com/warranty.