Preparations At The Workplace; Setting The Power Level - Hilti TE 60-A36 Manual De Instrucciones Original

Total vibration in accordance with EN 60745
Hammer drilling in concrete (a
Uncertainty (K)
Chiseling in concrete (a
Uncertainty (K)
5 Operation
5.1

Preparations at the workplace

Switch the product off or remove the battery before making adjustments or changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out toward the rear.
5.1.2 Fitting the side handle
CAUTION
Risk of injury Loss of control over the product.
▶ Check that the side handle is fitted correctly and tightened securely. Check that the clamping band is
engaged in the groove in the product.
CAUTION
Risk of injury. The depth gauge, if fitted but not used, might hinder the operator.
▶ Remove the depth gauge from the product.
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and into the recess provided.
3. Set the side handle to the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
5.1.3 Fitting the depth gauge (optional)
1. Release the side handle clamping band by turning the handle grip.
2. Slide the depth gauge from the front into the 2 guide holes provided.
3. Secure the side handle by turning the knob until the clamping band is tight.
5.1.4

Setting the power level

After the battery is inserted, the product is always set by default to full power.
1. Press the "button for half power". The product runs at half power.
▶ The "half power indicator" lights up.
2. Press the "button for half power" again. The product runs at full power.
▶ The "half power indicator" goes out.
5.1.5 Inserting / removing the accessory tool
DANGER
Risk of fire! Risk of contact between the hot accessory tool and highly inflammable materials.
▶ Do not lay the hot accessory tool down on highly inflammable materials.
*2201898*
)
h, HD
)
h, CHeq
2
3
4
5
2201898
TE 60-A36
8.3 m/s²
1.5 m/s²
6.7 m/s²
1.5 m/s²
English 21